Juniper certification JN0-661 simulation questions
Since to choose to participate in the Juniper JN0-661 certification exam, of course, it is necessary to have to go through. This is also the performance that you are strong-willed. Passtcert Juniper certification JN0-661 simulation questions are the best choice to help you pass the exam. The Juniper certification JN0-661 simulation questions of Passtcert website have a unique good quality on the internet. If you want to pass the Juniper JN0-661 exam, you'd better to buy Passtcert exam training materials quickly.
Juniper JN0-661 exam will be a milestone in your career, and may dig into new opportunities, but how do you pass Juniper JN0-661 exam? Do not worry, help is at hand, with Passtcert you no longer need to be afraid. Passtcert Juniper certification JN0-661 simulation questions is the pioneer in exam preparation.If you find any quality problems of our JN0-661 or you do not pass the exam, we will unconditionally full refund.
Share some JNCIP-SP JN0-661 exam questions and answers below.
Which address range has been specifically reserved for use with SSM traffic?
A. 233.0.0.0/8
B.224.2.0.0/16
C.232.0.0.0/8
D. 239.0.0.0/8
Answer: C
Which address range has been specifically reserved for use with SSM traffic?
A.233.0.0.0/8
B.224.2.0.0/16
C.232.0.0.0/8
D.239.0.0.0/8
Answer: C
Click the Exhibit button
Referring to the exhibit, you have configured an L3VPN that connects Site-1 and Site-2 together, but the BGP routes are being hidden on the PE routers. The topology in this scenario is shown below.
Site-1 > PE-1 > P-1 > P-2 > PE-2 > Site-2
Which two acttions would allow communication Site-1 and Site-2? (Choose two.)
A.Disable CSPF on under MPLS on P-1 and P-2.
B.Configure DGP on P-1 and P-2.
C. Enable RSVP for all interfaces on P-1 and P-2.
D.Enable LDP for all interfaces on all routers.
Answer: C, D
You work for a service provider and need to build EVPN service which provides an active/active multihorning topology using a single CE at each site. In this scenario, which two statements are true? (Choose two.)
A.An Ethernet segment appears as a LAG to the CE device.
B. A backup designated forwarder is elected for forwarding BUM traffic to the CE device
C.The Ethernet segment identifier must be an all zeros identifier
D.A designated forwarder is elected for forwarding BUM traffic to the CE device.
Answer: A
Click the Exhibit button.
Referring to the exhibit button, you are asked to ensure that traffic destined for the 5 5.5.0/24 network must use the LSP named Top Which two actions would you perform to accomplish this task*? (Choose two)
A. Apply the policy as an import policy for BGP on R1
B.Create a routing policy that matches the route 5.5.5.0/24 with an action of install-nexthop Isp Top.
C.Create a routing policy that matches the route 5.5.5.0/24 with an action of next-hop Top.
D.Apply the policy to the forwarding table on R1.
Answer: B, D
Click the Exhibit button
You must ensure that r1's IPv4 loopback address exists in r3's inet 0 routing table
Referring to the exhibit, which statement is true?
A.An IPv4 unicast realm can be enabled on each router.
B.A policy can be configured on M to redistribute 172.16.100.1/32 into OSPFv2, which would cause r3 to eventually learn the route and place it into inet0.
C.A RIB group can be configured on r3 to copy that route into inet 0 because 172.16.100.1/32 exists in r3's inet6.0 table
D.A policy can be configured on r1 to redistribute 172 16 100 1/32 into OSPFv3, which would cause r3 to eventually learn the route and place it into inet 0.
Answer: C
Which command will match communities 101:111,111:1, and 999:1111?
A. set policy-options commmity COMMUNITY members "^...:1?"
B. set policy-options community COMMUNITY members "^1.*:1+"
C. set policy-options community COMMUNrTY members ["^1.1:1?" 999:1111]
D. set policy-options community COMMUNITY members "^...:1+"
Answer: D
The certification of Juniper JN0-661 more and more valuable in the IT area and a lot people use the Juniper certification JN0-661 simulation questions of Passtcert to pass Juniper certification JN0-661 exam. Through so many feedbacks of these products, our Passtcert products prove to be trusted. Education degree does not equal strength, and it does not mean ability. Education degree just mean that you have this learning experience only. And the real ability is exercised in practice, it is not necessarily linked with the academic qualifications.
Juniper JN0-661 exam will be a milestone in your career, and may dig into new opportunities, but how do you pass Juniper JN0-661 exam? Do not worry, help is at hand, with Passtcert you no longer need to be afraid. Passtcert Juniper certification JN0-661 simulation questions is the pioneer in exam preparation.If you find any quality problems of our JN0-661 or you do not pass the exam, we will unconditionally full refund.
Share some JNCIP-SP JN0-661 exam questions and answers below.
Which address range has been specifically reserved for use with SSM traffic?
A. 233.0.0.0/8
B.224.2.0.0/16
C.232.0.0.0/8
D. 239.0.0.0/8
Answer: C
Which address range has been specifically reserved for use with SSM traffic?
A.233.0.0.0/8
B.224.2.0.0/16
C.232.0.0.0/8
D.239.0.0.0/8
Answer: C
Click the Exhibit button
Referring to the exhibit, you have configured an L3VPN that connects Site-1 and Site-2 together, but the BGP routes are being hidden on the PE routers. The topology in this scenario is shown below.
Site-1 > PE-1 > P-1 > P-2 > PE-2 > Site-2
Which two acttions would allow communication Site-1 and Site-2? (Choose two.)
A.Disable CSPF on under MPLS on P-1 and P-2.
B.Configure DGP on P-1 and P-2.
C. Enable RSVP for all interfaces on P-1 and P-2.
D.Enable LDP for all interfaces on all routers.
Answer: C, D
You work for a service provider and need to build EVPN service which provides an active/active multihorning topology using a single CE at each site. In this scenario, which two statements are true? (Choose two.)
A.An Ethernet segment appears as a LAG to the CE device.
B. A backup designated forwarder is elected for forwarding BUM traffic to the CE device
C.The Ethernet segment identifier must be an all zeros identifier
D.A designated forwarder is elected for forwarding BUM traffic to the CE device.
Answer: A
Click the Exhibit button.
Referring to the exhibit button, you are asked to ensure that traffic destined for the 5 5.5.0/24 network must use the LSP named Top Which two actions would you perform to accomplish this task*? (Choose two)
A. Apply the policy as an import policy for BGP on R1
B.Create a routing policy that matches the route 5.5.5.0/24 with an action of install-nexthop Isp Top.
C.Create a routing policy that matches the route 5.5.5.0/24 with an action of next-hop Top.
D.Apply the policy to the forwarding table on R1.
Answer: B, D
Click the Exhibit button
You must ensure that r1's IPv4 loopback address exists in r3's inet 0 routing table
Referring to the exhibit, which statement is true?
A.An IPv4 unicast realm can be enabled on each router.
B.A policy can be configured on M to redistribute 172.16.100.1/32 into OSPFv2, which would cause r3 to eventually learn the route and place it into inet0.
C.A RIB group can be configured on r3 to copy that route into inet 0 because 172.16.100.1/32 exists in r3's inet6.0 table
D.A policy can be configured on r1 to redistribute 172 16 100 1/32 into OSPFv3, which would cause r3 to eventually learn the route and place it into inet 0.
Answer: C
Which command will match communities 101:111,111:1, and 999:1111?
A. set policy-options commmity COMMUNITY members "^...:1?"
B. set policy-options community COMMUNITY members "^1.*:1+"
C. set policy-options community COMMUNrTY members ["^1.1:1?" 999:1111]
D. set policy-options community COMMUNITY members "^...:1+"
Answer: D
The certification of Juniper JN0-661 more and more valuable in the IT area and a lot people use the Juniper certification JN0-661 simulation questions of Passtcert to pass Juniper certification JN0-661 exam. Through so many feedbacks of these products, our Passtcert products prove to be trusted. Education degree does not equal strength, and it does not mean ability. Education degree just mean that you have this learning experience only. And the real ability is exercised in practice, it is not necessarily linked with the academic qualifications.
Comments
Post a Comment